Looking to borrow/hire a prop puller for boat in Poole.

[wipe_out]

Hi, planning on replacing the prop when we come out the water but I need a prop puller.. Anyone near enough to Poole have one I could perhaps borrow or h

 

[coopec]

Hi, planning on replacing the prop when we come out the water but I need a prop puller.. Anyone near enough to Poole have one I could perhaps borrow or h

If you can't borrow one maybe you can make one?

 

[Ammonite]

They are only £10-£15 on ebay provided the prop is not huge. Search for " hub puller"

Hi, planning on replacing the prop when we come out the water but I need a prop puller.. Anyone near enough to Poole have one I could perhaps borrow or h

 

[rogerthebodger]

I made my own like this one.

 

[wipe_out]

They are only £10-£15 on ebay provided the prop is not huge. Search for " hub puller"

Wasn't sure if the standard 3 claw type puller would work but I guess it's worth a try..

 

[Ammonite]

Wasn't sure if the standard 3 claw type puller would work but I guess it's worth a try..

Works fine for me. Wind it up nice and tight and it either pops off on its own or with a tap from a mallet on the boss

 

[Aardee]

Works fine for me. Wind it up nice and tight and it either pops off on its own or with a tap from a mallet on the boss

Worked for me too, but I did need to apply a little heat.

 

[LadyInBed]

Wasn't sure if the standard 3 claw type puller would work but I guess it's worth a try..

The ones with solid arms are better than the ones with articulated arms.
You might have to put a binding around the ones with articulated arms to keep them in place.
fixed arm 1.07/21-B | Gedore 1.07/21-B Lever Press Bearing Puller, 160 (External) mm, 220 (Internal) mm capacity | RS Components
articulated arm Cromwell Tools - Experts in Hand Tools, Power Tools and PPE

 

[peteK]

Didnt work for me,skeg in the way had to make puller.