Looking for fuse box

[cygnusv]

I'm doing up our 60+ year wheelhouse and renewing, rewiring and painting etc. I intend to move our 24v fuse block out into the open (under the chart table) to make it easier if we have a fault. I have a couple of (new) automotive fuse boards, both Durite. I did wonder if a larger fuseboard was available that could be clearly marked with the target of each fuse?

Suggestions welcome...

 

[nigelmercier]

Most I've ever seen is 8 ways, but nothing to prevent you having more than one.
http://www.amazon.co.uk/exec/obidos/ASIN/B004JFRWLW/dolcetto-21

 

[prv]

Most I've ever seen is 8 ways

I have a 12 way one, similar to this: http://www.power-store.com/view-item.asp?itemid=2342&id=390&

Pete

 

[FullCircle]

Same as Pete's but a link to the Original Equipment Manufacturer.
Expensive, but very very good quality. Also separated earth bus bar in the same unit ,if you need it.

http://www.bluesea.com/products/502...Cover - 12 Circuit with Negative Bus/featured

 

[alahol2]

Here's a cheaper 12 way... http://www.autoelectricsupplies.co.uk/product/1052/category/63

 

[Phild64]

Or a slightly cheaper version http://www.iem-services.co.uk/showdetails.asp?id=959

 

[nigelmercier]

Most I've ever seen is 8 ways ...

I'll rephrase that: Most I've ever seen with spade connectors, rather than nasty chocolate block connectors, is 8 ways.

 

[BERT T]

Same as Pete's but a link to the Original Equipment Manufacturer.
Expensive, but very very good quality. Also separated earth bus bar in the same unit ,if you need it.

http://www.bluesea.com/products/502...Cover - 12 Circuit with Negative Bus/featured

As FullCircle says Bluesea are excellent quality, its just a pity that the distributors here in the UK aren't as excellent. When I needed a spare screw (A/F thread) for a Bluesea unit, I contacted them and they were not at all interested. In the end I had to get the screw sent direct from Bluesea themselves in the USA.