Looking for an outdrive harness

[Bob_CT]

I have a 278 Four Winns Vista with a defective starboard, outdrive harness. The part I'm looking for has 334191 stamped on the connector but I'm anticipating having to purchase an entire harness if I can find one. Four Winns has not provided me with any support other than giving me the local dealer.
Any and all assistance will be greatly appreciated.

 

[Mr Googler]

What make / model outdrive is it

 

[Bob_CT]

278 Vista, 1999 (may appear as a 1998 as that was the last year they officially made the boat)
S/N: FWNCC0101899

From what I can see on the Starboard engine it looks like:

Engine	Transom Assm	Drive Unit
4 CGI 2BVCSE	TSK SX-M	SX-M 1 79
419017089	4111597659	4112062044
8868758	386844	3868893

From what I can see on the Port engine it looks like:

?? SGI PRYCE	????? -M	SX-M 1 7?
??? 170803	412115997477	411206897
3868758	386844	38688921

 

[Mr Googler]

This should get you started

3855711 Volvo.Penta Wiring harness

 

[GrahamHR]

This should get you started

3855711 Volvo.Penta Wiring harness

They also made 258 and 278 models from 2006. I have one of the latter. Some dodgy wiring i n 2008, when there were factory redundancies and they stopped providing wiring diagrams to owners. Shame really.

 

[simonfraser]

what is wrong with the harness ?

 

[Bob_CT]

The 385571 harness is different from my unit. Mine has the two connectors for power and commands from the switch but include a fuse, connector for the motor and the two solenoids (connector has 334191 imprinted on it). I can hear the relays clicking but the motor isn't engaging. If I by-pass the solenoids the go up and down.
I would like to get just the sockets for the solenoids but would purchase the entire harness if available.
I thank everyone for trying

 

[simonfraser]

' If I by-pass the solenoids they go up and down '
does that not indicate the solenoids are faulty ?

 

[Bob_CT]

Thanks for the quick replay. I've tried six different solenoids and they all do the same thing. I'm thinking it's the electrical connectors in the housing.

I know the harness is overkill. Not sure if I can extract the connectors in the solenoid base and replace them.