Lenco Trim Tab Rams - sourcing from thE UK

oGaryo

Well-Known Member
Joined
28 Nov 2008
Messages
8,203
Location
Isle of Wight
Visit site
Whilst sorting out the sterndrive on Lorna Jane when on the hard there'll be a couple of other jobs to sort out, the speedo for one but more importantly the duff Starboard Trim tab..

I've not carried out the root cause fault finding steps yet as it's been a little difficult to do so with a beer in one hand and food in the other which is all I've seemingly done for the last 10 days accordingly to my expanding wasteline:o

That said, one thing I did do is check the operation of the tab on each trip out in case someone had sprinkled fairy dust on it overnight.. in doing so, it didn't fix the tab but did highlight that on pressing the remote button, the engine blower dropped in speed significantly.. so that leads me to one of two conclusions:

1: I've an earthing issue but unlikly as I'd imagine both tabs would be affected.

2: the ram has jammed and the motor's sapping the wiggly amps as it tries to move it.

So, on the assumption it's the latter and being so far from the boat I cannot check, I may purchase a ram prospectively so I can sort it out for sure when the boat's out the water, holding it as a spare if my assumed root cause diagnosis is wrong.

Looking on t'web... I can't find anywhere in the UK that supplies them at anything but a rediculously high price... are there alternatives considering they're a simple electrically driven ram?

thanks Gary
 
root cause identified on this one... located the cabling to both actuators, both contained two wires (black and white) that had been crimped to the wires leading to the remote switches.. replaced the crimps with plug and socket style crimps today so I could interchange the connectors.. swapped the connections over and the fault moved to the other switch confirming the actuator was duff but also confirming everything was ok from the switches to the crimps.

Have removed the actuator and on doing so it's clear there has been water ingress from the top... got it at home to see if I can get it working and will splice back in to the point I cut the cable out from the loom.

Will have the boat back to being 100% in a couple of weeks I reckon once this and the strendrive is sorted, in time to go play in the sun hopefully:cool:
 
Top