Falcoron
Well-Known Member
I have a small leak on these old valves on my 2 diesel tanks, they are leaking at the lever.
I have tried removing the lever and tightening the nut behind but they are fully tight and still dripping.
they drip if on or off position.
Can anyone please let me know where i can get replacement's? i have asked in the usual places ( Tek tanks, asap etc)
The top valve is only a sight tube so will remove and seal the hole as im fitting a proper gauge.
so need 2 replacement's to fix this issue. I have tanks drained down.
The pipe work is imperial i think so around 5/16"

I have tried removing the lever and tightening the nut behind but they are fully tight and still dripping.
they drip if on or off position.
Can anyone please let me know where i can get replacement's? i have asked in the usual places ( Tek tanks, asap etc)
The top valve is only a sight tube so will remove and seal the hole as im fitting a proper gauge.
so need 2 replacement's to fix this issue. I have tanks drained down.
The pipe work is imperial i think so around 5/16"
