Dave_Rolfe
Well-Known Member
I have a Toshiba Equium M50-164 that I want to use onboard without using an inverter. Maplins do a suitable converter from 12v to the 15v that I need but in the blurb advertising it it states that I must be sure the central pin of the laptop power input is positive. How can I test to check this as I have been unable to find out from any other source.
If I take the existing mains transformer and plug it into the mains then put the red probe from a multimeter in the centre of the plug with the black lead against the metal outside of the plug I get a reading of +15.29 v. If I reverse the probes I get a -15.29v. Does this tell me the centre pin would be positive please.
As you can tell my understanding of electrical matters is somewhat limited, I just want to be sure.
If I take the existing mains transformer and plug it into the mains then put the red probe from a multimeter in the centre of the plug with the black lead against the metal outside of the plug I get a reading of +15.29 v. If I reverse the probes I get a -15.29v. Does this tell me the centre pin would be positive please.
As you can tell my understanding of electrical matters is somewhat limited, I just want to be sure.