saltylegs
Active member
Fan turns for a few seconds and compressor gives a judder and eventually green light on and yellow and red flash,
Batteries are in good order and have checked all connections, with engine running I have 13.8v at the power block on the unit which drops to about 13.5 as compressor tries to start.
Fan runs fine when connected to battery directly and I have tried a new battery beside the compressor unit and connected directly to the power block but still the same results.
Scratching head and thanks in advance.
Salty.
AHH
I finally found this, http://www.ybw.com/forums/archive/index.php/t-244194.html
So it looks like it is the smart controller (the red connection block) or the black box which is the DC to AC converter.
Thanks for looking.
Salty.
Batteries are in good order and have checked all connections, with engine running I have 13.8v at the power block on the unit which drops to about 13.5 as compressor tries to start.
Fan runs fine when connected to battery directly and I have tried a new battery beside the compressor unit and connected directly to the power block but still the same results.
Scratching head and thanks in advance.
Salty.
AHH
I finally found this, http://www.ybw.com/forums/archive/index.php/t-244194.html
So it looks like it is the smart controller (the red connection block) or the black box which is the DC to AC converter.
Thanks for looking.
Salty.
Last edited: