Is my solar panel bxggered?

MarcJ

Well-Known Member
Joined
17 Apr 2013
Messages
455
Location
Nantwich, Cheshire
Visit site
As above, my 25W panel suddenly stopped working. I disconnected it and stuck a multimeter on the ends - just showing 2 volts. I can only assume it's knackered, but wondering if I might be missing anything. Oh I took the measurement in full sun.
TIA! :)
 
Doesn't sound hopeful!
Check the meter isn't on 'AC' or anything.
Also no shorts or water where the wires come out.
Try measuring on the back of the panel in case the failure is the wire.
 
When I did the same I couldn't get a reading initially as I had the voltage range too low.

Try it on a higher range of you haven't already.
 
I found that mine was doing the same as one of the 2 wires had 'de-soldered' itself from the panel. SImple resolder, and all was well.
 
You could also check the diode .
My post #5 , we had a panel that wouldn't fire up in the morning , when we test d it with a meter it cause a small spark , which in turn started it working again , why my suggestion in my post .
 
Oh well it did turn out to be the connection to the panel itself, I tried soldering the wires directly to the terminals, but in the process completely knackered it! Ho hum, was thinking of getting a bigger panel anyway! :)
 
Top