iPad and Raymarine hybrid touch 7.

[steveeasy]

I’ve got Navionics on my iPhone and iPad linked but would like to display these on my chartplotter too.
Can I do this and if so do I need any additional software?.

Thanks
Steveeasy

 

[PaulRainbow]

I’ve got Navionics on my iPhone and iPad linked but would like to display these on my chartplotter too.
Can I do this and if so do I need any additional software?.

Thanks
Steveeasy

Navionics for iPad/iPhone cannot be used on a plotter.

Depending on the plotter, you might be able to view plotter data on an iPad, with an appropriate Raymarine app.

 

[steveeasy]

Hi Paul,
I’ve got a Navionics card for chartplotter(out of date) and I’ve got Navionics for iPhone and iPad with I need to renew in June.

I was hoping all three could be linked together and with charts for Faroes added.

Perhaps I can update Navionics card and link iPhone and iPad to chartplotter.

Steveeasy

 

[PaulRainbow]

Hi Paul,
I’ve got a Navionics card for chartplotter(out of date) and I’ve got Navionics for iPhone and iPad with I need to renew in June.

I was hoping all three could be linked together and with charts for Faroes added.

Perhaps I can update Navionics card and link iPhone and iPad to chartplotter.

Steveeasy

You could try the Raymarine app and see if you can use the charts on the plotter, on your tablet etc. If so, only update the plotter charts. I'm not familiar enough with the Raymarine app to say if it will work with your plotter.

 

[mrming]

You can upload routes from the Navionics app on the iPad, to your Raymarine plotter. If you’re using a Navionics chart on the plotter you then have a fairly similar experience, although obviously the plotter’s UI is different. Garmin has documentation on how to do it, it’s quite straightforward. This is how I do it - passage plan on the iPad and then sync and upload the routes to my Raymarine plotter.