Instrument Glass

[Chris_Robb]

I have broken the glass on a neco voltmeter - anyone know where I can get a replacement glass cut. It pretty thin glass (but flat) so I would imagin an ordrinary glazing company not being the right source!

Any ideas?

<hr width=100% size=1>

 

[steve28]

clock repairers are normally a good for this.

<hr width=100% size=1>

 

[Davy_S]

Hi chris.
I needed to get two small pieces of glass cut for an old barrometer a sixteenth of an inch thick, two circles 4 inches and 2 inches. I went to an old established glazing firm and they cut them no problem.

<hr width=100% size=1>

 

[Chris_Robb]

Thanks - I give our local ones a call.

<hr width=100% size=1>