Individual A4 nuts and bolts - Portsmouth.

[CPD]

I'm in need of a supplier of individual nuts/bolts that have to be A4. I also need to go along and have a look, as what I am after will not be standard, so a visit in person has to happen. Can anyone suggest a supplier in the Portsmouth/Solent area ?

Many thanks.

 

[braehouse]

Give Arthur's chandlery a call they are on Mumby road and may have what you want. They seem to have copious amounts of draws with all sorts of fastenings.

 

[SimonP85]

Harbour Chandlers at Emsworth Yacht Harbour always seem have a great selection to purchase individually and at a very reasonable price.

http://www.harbour-chandlers.com

 

[johnwest]

Arthurs Chandlery in Mumby Road, Gosport. A 3 minute walk from the Gosport ferry. I can't remember the last time I left empty handed.

j

 

[Fantasie 19]

+1 for Harbour Chandlers at Emsworth Yacht Harbour... also Seateach just up the road

 

[ostell]

J. W. Tout in Portsmouth. Used them a few times for individual bolts and nuts. May have moved location so give them a call.

Failing that ABC Marine in Mill Rythe Lane Hayling Island, next to Hayling yacht company. Sell stainless by weight, not silly prepacks.

 

[lw395]

Baseline marine in Segensworth is good for many items.
A2A4 Stainless?

 

[VicS]

+ 1 for Seateach ( Emsworth). Thats where I normally go for non prepacked fasteners

Also the chandlery in Emsworth Marina ???

Non standard is a bit of an ask though

 

[Schuss39]

Mill Tools Engineering Supplies at Unit A12, The Sanderson Centre, Lees Lane, Gosport - 02392 526551

Is a proper engineering supplier! None of the prepacked stuff.

I have found it cheaper than the chandleries

 

[ripvan1]

J. W. Tout in Portsmouth. Used them a few times for individual bolts and nuts. May have moved location so give them a call.

.

Tout's have closed down - end of an era

 

[H2O]

Have a look at the below they are in your area,
http://www.gtc-direct.com/

 

[wooslehunter]

+1 for Arthurs & Harbour Chandlers. Also try CP Fastenings in Southsea.

 

[lw395]

I've also had very quick service from 'boltmeup' and 'gwrfasteners' on ebay.

 

[CPD]

Thanks one and all !!

 

[ostell]

Tout's have closed down - end of an era

I knew they had been made a good offer for the premises but thought they had moved. Shame about that.

 

[Glen Taylor]

Tout's have closed down - end of an era

Hi Touts have close but ML who have been welders fabricators for years, are just around the corner have taken over now they have brought all of there machines and got a trade counter who have loads of stainless bits in stock. They also do steel sales i hope this is of help to some of you.

There number is 02392819114