I'm going to put the safety guard on my grinder.

burgundyben

Well-known member
Joined
28 Nov 2002
Messages
7,485
Location
Niton Radio
Visit site
I\'m going to put the safety guard on my grinder.

I took the safety guard off my grinder a while ago so I could get the last bit of life out of a cutting disc.

1,2,3,4,5,6,7,8,9,10, yep all still there except for a slight nick in one knuckle.....

I reckon today I have learnt a valuable lesson.



<hr width=100% size=1>Rehab is for quitters.
 

gr1mb0

New member
Joined
19 Sep 2003
Messages
51
Location
Dorset
Visit site
Re: I\'m going to put the safety guard on my grinder.

Many moons ago, I did a stint at the Industrial Training Centre in Poole.

A student there tried to cut into a lump of metal with a grinder (couldn't tell the difference between a grinder and a mill, apparently) -- unsurprisingly, the grinding wheel shattered.

The shattered disk punctured the factory wall, went through the wire reinforced glass windows, and also through the roof some 20' overhead -- looked like someone had strafed the building with a Kalashnikov (sp?)!

...ever since, I tend to use the safety features provided :eek:)

<hr width=100% size=1>
 

lanason

Active member
Joined
23 Jul 2001
Messages
7,512
Location
Malvern, Worcs
Visit site
Re: I\'m going to put the safety guard on my grinder.

When i was an apprentice a mate forgot to tighten up the screws on a parting off tool in a lathe. A few seconds after contact with the metal we saw the said tool travelling vertically upwards - never to be seen again. So it either went thro the roof or got stuck in it. /forums/images/icons/crazy.gif

<hr width=100% size=1>Adrian <A target="_blank" HREF=http://www.arweb.co.uk/argallery/kelisha>Kelisha</A> Nothing is better than a Holiday
 

gonfishing

New member
Joined
21 Jan 2003
Messages
1,707
Visit site
Re: I\'m going to put the safety guard on my grinder.

Your'e a lucky man Ben!!! last time I tried cutting corners I took my goggles of so I could see better (no pun intended) I ended up in the Eye hospital having 4 pieces of metel removed from the right eye!!! a painful experience I will not be repeating!

Julian

<hr width=100% size=1>
 

Moose

New member
Joined
1 Nov 2001
Messages
2,063
Location
West Sussex, Boat in Chichester
Visit site
Re: I\'m going to put the safety guard on my grinder.

I CANNOT STOP LAUGHING[laughl

<hr width=100% size=1>
moosewalk.sized.gif
 

BrendanS

Well-known member
Joined
11 Jun 2002
Messages
64,521
Location
Tesla in Space
Visit site
Re: I\'m going to put the safety guard on my grinder.

Hey !

Purple paws? Are you walking through a forest of lavender or wot?

<hr width=100% size=1>Utinam logica falsa tuam philisophiam totam suffodiant
 
Top