Idle thought

Twister_Ken

Well-Known Member
Joined
31 May 2001
Messages
27,584
Location
'ang on a mo, I'll just take some bearings
Visit site
As antifouling is such a drag - lift boat, scrape hull, fair in the dodgy bits, antifoul, boat back in, aching back, sore wallet - why doesn't some smartarse boat designer design a boat that works better with limpets and seaweed attached?

<hr width=100% size=1><A target="_blank" HREF=http://www.writeforweb.com/twister1>Let's Twist Again</A>
 
Limpets

At low water last weekend I noticed what a brilliant job the limpets do of keeping the harbour wall free from weed, slime, barnacles etc. Great bare patches, easily the size of the underwater area of my yacht, where a group of no more than twenty are browsing. They seem to prefer smooth areas.

Do you think some genius could GM an aerodynamic limpet for yacht use? Or for the anti-GM'ers, train them to crawl above the waterline Friday evenings prior to the weekend outing?
 
Mackerel never seem to have barnacles or limpets on them so why not skin enough of them and stick their skins on instead of antifoul?

<hr width=100% size=1>
 
Wasn't someone trying to develope an anti-foul based on the chemicals in fish skin? Or was it an ultra slippery smooth coating that stopped the fouling getting a decent grip? Mike.

<hr width=100% size=1>My Mum say's I'm not a fat b@st@rd, just heavy boned.
 
Neever dae patatties! Paddy is for wiping the Corribbee doon wif ra pattie juice, ah'm for drinkin' it , after a wee whilie. Hae anybody seen my clothes pole, the leprecorns seem tae hae speereeted it awa'

<hr width=100% size=1>
 
Why not attached a couple of lampreys? - they scare off the barnacles, eat the weed and if you attach them to your bonding system you will not need to by expensive anodes!

<hr width=100% size=1>I've got wind......................
...............................in my sails!
 
Is Paddy from Ballymena because that might be your problem as you can always tell a ballymena man but you can't tell him much

<hr width=100% size=1>regards
Claymore
/forums/images/icons/smile.gif
 
Top