jon and michie
Well-known member
Hi - when I was last at my boat getting ready for her lift out I was cleaning the bilge and found a piece of plastic tube/pipe which is 57mm or 2 1/4 inch long and 12mm or 1/2 inch wide.
I do have an idea where its from but I cannot check due to lockdown restrictions so I thought I would share it here to have a second opinion - my thinking it is from the coolant tank hold down bolt as a spacer which is listed here but not sure if it is metal or plastic item 38.
I am thinking this as at the start of last year I cleaned the heat exchanger and oil cooler so the expansion tank was taken off
Volvo Penta Exploded view / schematic Heat Exchanger KAD300-A, KAMD300-A - MarinePartsEurope.com
Here are the pics of the said piece.
I do have an idea where its from but I cannot check due to lockdown restrictions so I thought I would share it here to have a second opinion - my thinking it is from the coolant tank hold down bolt as a spacer which is listed here but not sure if it is metal or plastic item 38.
I am thinking this as at the start of last year I cleaned the heat exchanger and oil cooler so the expansion tank was taken off
Volvo Penta Exploded view / schematic Heat Exchanger KAD300-A, KAMD300-A - MarinePartsEurope.com
Here are the pics of the said piece.
Attachments
Last edited: