Hurley signet seacock

Rhylsailor

New Member
Joined
21 Sep 2020
Messages
8
Visit site
Hi I've purchased a signet 20 and spent the weekend jetwashing it...the cockpit filled with water and so I went below and noticed 2 seacocks I've turned the both and only 1 seems to drain very slowly ...are they hard to replace or am I just better shutting off totally...also whilst under the cockpit I noticed there was no bildge pump should these have one and is best place to fit it
 
Probably blocked with stuff.Is there actually a sump in the bilge to collect bilge water if there is arrange the pump maybe in the cockpit or cockpit locker with the out let high up on the topsides
 
Looking for a suitable outboard for the boat I've read that the boat weighs 2300 lbs and a calculation says 1 hp per 500 lbs of weight should be enough giving a 4hp outboard does that sound about right for a 20 ft boat being used at sea
 
Top