Hurley H30 Davits

[Shifty]

Has anybody on here had any experience of these davits as considering them for my tender and 15hp Outboard. Thanks.

 

[sharpness]

I fitted the H30 to mine. I like the fact it enables me to board either side of the boat, where as a passerelle limits to boarding portside only.
They are well made, easy to install, maintenance free, BUT they are a ridiculous price in my opinion for what is a piece of plastic that swivels.
Have a look at their website for demo videos showing how you retrieve the tender. I chose the standard winch, but you can purchase a power winch if you prefer. My tender is a Ali Rib with 10hp and it is easy to winch onboard. (The demo vids show them with a jetski, I reckon that would be pushing its limits in my opinion).
Pics of my setup:

 

[Shifty]

I fitted the H30 to mine. I like the fact it enables me to board either side of the boat, where as a passerelle limits to boarding portside only.
They are well made, easy to install, maintenance free, BUT they are a ridiculous price in my opinion for what is a piece of plastic that swivels.
Have a look at their website for demo videos showing how you retrieve the tender. I chose the standard winch, but you can purchase a power winch if you prefer. My tender is a Ali Rib with 10hp and it is easy to winch onboard. (The demo vids show them with a jetski, I reckon that would be pushing its limits in my opinion).
Pics of my setup:

View attachment 113031

View attachment 113030

Thanks for the prompt reply, agree with you regards the cost but needs must! Do you envisage we would have a
problem with the winch arm fouling the back of the boat due to its upright nature? ( sorry about the odd picture as it’s the only
one I have due to boat being new to us)

 

[sharpness]

The bathing platform / stern of your boat looks to have enough space and with the transom sides not protruding as much as mine you may be fine. I did have to shorten the length of the winch box section on mine so that it would fit inside the transom side when i swivel the tender onboard.
Another thing that may be worth checking with the Hurley Davits dealer is if the height of your bathing platform is not too high. It looks ok, but worth asking the question

 

[Shifty]

The bathing platform / stern of your boat looks to have enough space and with the transom sides not protruding as much as mine you may be fine. I did have to shorten the length of the winch box section on mine so that it would fit inside the transom side when i swivel the tender onboard.
Another thing that may be worth checking with the Hurley Davits dealer is if the height of your bathing platform is not too high. It looks ok, but worth asking the question

Thanks for your help, I’ll contact them and check the platform height.