How to fill screw holes in grp after lifting teak deck

[Seastoke]

We took ours off , then sanded stuck down with sik held down with original screws and large washers as we had drilled to fit 12 mm teak bungs , so we took screw out after glue gone off fitted bungs with glue , sanded then black caulk. If you wanted photo I could post.

 

[limecc]

We need to lift or old teak deck, but once done what do we fill the hundreds of holes with? Is epoxy plus gel coat enough?

I enjoyed this video dealing with the very subject

 

[SeaAndSea]

ack caulk. If you wanted photo I could post.

Photos would be ideal please

 

[Seastoke]

 

[SeaAndSea]

Well ripping up the deck was fun. took a couple of weeks of very part time activity. all screw holes filled, most of them first time.
Removal of the teak adhesive is now in progress, its awful stuff - like rubber or mastic and a pig to get up.
#biggerjob