How to apply antifoul on power boat

[nictbrown]

I have antifouled many displacement hulls but having foresaken the cloth and bought a planning boat, I would welcome advice on what to use to apply antifoul please. With all those running strakes is a mini roller best? If so are the BQ Wickes etc brands adequate. Thanks
Nic

<hr width=100% size=1>Regards Nic

 

[omega2]

If you,use the foam ones do not lay on too heavily or they break up, the woolly ones are best and not a great deal dearer, throw away after use.

<hr width=100% size=1>J HAMER

 

[BarryH]

If you have an outdrive leave a gap between antifoul and the transom shield. Normally the gap is about an inch.

<hr width=100% size=1>

 

[Dave_Snelson]

A gloss mini roller applying Trilux or Interspeed Ultra will do the trick nicely.

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[miket]

Exactly as you did before but have a brush handy to do spray rails etc that roller does not reach.

<hr width=100% size=1>

 

[Benny1]

Hmmm...how to best apply antifoul...hmmm...pick up fone, dial baoty type fixit man say 'please anti-foul boat', put fone down.

<hr width=100% size=1>

 

[ArthurWood]

Right - that's what I shall be doing today. It's almost two years since it was last done, so I have to bite the bullet and lay out ~$2K.

<hr width=100% size=1>