Honwave t 27

[Seastoke]

Hi is an honwave t27 to big for a tender on a 36ft fly ,we do not have davits or crane

 

[BruceK]

Didn't you just buy a new tender?

 

[Greg2]

I wouldn't have thought so. We had one on a Targa 35 and sold it to a friend who had a 36 foot flybridge and it was fine on both. Good bit of kit

 

[mparrish]

We got a t27 to go on our Bavaria 37. Good tender and sits well on the bathing platform (big). We use Hurley H2O davits allowing the tender to sit flat and keep the outboard in place with cover over tender and engine. Works really well and doesn't look out of proportion to the boat.

 

[Bigplumbs]

Have a look at the Waveco 2.6 m it is an excellent SIB very well made a strong and is about £290.

Regards

Dennis
.

 

[rafiki_]

We got a t27 to go on our Bavaria 37. Good tender and sits well on the bathing platform (big). We use Hurley H2O davits allowing the tender to sit flat and keep the outboard in place with cover over tender and engine. Works really well and doesn't look out of proportion to the boat.

Our Ribeye 2.6 sits nicely on our Hurley's too.

 

[mparrish]

Have you got the H2O version ?? If so do you have any issues with the 'stopper' blocks working loose ??

 

[rafiki_]

Have you got the H2O version ?? If so do you have any issues with the 'stopper' blocks working loose ??

Mine is about 3 yrs old, and never had any problems at all, other than the paint finish starting to peel, so I will have to remove and repaint.

 

[John_d_Smith]

I've got a T2.7 and it's a well made dinghy. Only problem with inflatable floor is the fasteners you hang it from are on the sides so it's not easy to get it tight up to the davits, unless someone knows a better solution.