Hinged Perspex cover for engine control panel

[Dull Spark]

My engine control panel is at the front of the cockpit, in the fresh air. It had a hinged Perspex cover in place, keeping the weather away from the electrics. I broke the cover recently and would appreciate any suggestions for a supplier of a replacement. Many thanks.

 

[Lightwave395]

My engine control panel is at the front of the cockpit, in the fresh air. It had a hinged Perspex cover in place, keeping the weather away from the electrics. I broke the cover recently and would appreciate any suggestions for a supplier of a replacement. Many thanks.

Depending on the size / thickness you need, you can buy pieces of A4 size tinted or clear perspex on ebay for a either side of a fiver

 

[Laysula]

If it's in a vulnerable position use Polycarbonate instead.

 

[NormanS]

Readily available, cut precisely to your required sizes, on the Internet. I have very recently done that, for the same purpose.

 

[paulajayne]

If you can get to North Fambridge I have some and can cut to the size you require.

 

[Billba]

Check these for size....third item down..
http://hadlowmarine.com/Pages/Acrylic items.html
Can recommend the company.
Cheers Bill

 

[Dull Spark]

Many thanks to all. I may buy a special from Hadlows or go for a Blue Peter badge and make my own. Good to know who the suppliers are. Thanks.

 

[petem]

These guys will make it for you http://thefrazerco.com and won't rip you off.