Help- anyone got any Plastimo 406-S bits?

[[32511]]

I've just fitted the 406-S roller reefing, and found that the aluminium spars are 250mm short. Does anyone have a suitable offcut lying around?
I'm ok for the plastic liner and the joining piece- will be grateful for any help, as at present the sail will foul the pulpit.

 

[seumask]

If you cant find one seateach will probably sell and send you the piece as they stock spare parts of Plastimo furling gear
http://www.seateach.com/

 

[dukes4monny]

If it's the same foil as the 810S I have a piece that might do you.........trouble is it's down on the boat and I'm not going down there until the weekend.
Send me a PM if you want it.

I've just checked on the Seateach site and this seems to suggest that the foil sections are the same.

 

[Refueler]

The 4 - 6 - 8 models do use same foils ... and Seateach may have a short section laying around. They could certainly supply a full section if needed as they are the Plastimo agents

 

[theforeman]

yes i have a section. it is in glasgow. how can it be got to mull. any of the chentleman cruisers around ?

 

[Razorfish]

I've got a section. if you get stuck give me a PM and we'll sort posting it out.

 

[DaveS]

Going through Glasgow tomorrow PM about 1500 en route to CC09. Any use? PM me if so.

 

[theforeman]

pm sent.

 

[Juggler7823]

I have about 1.3m foil and plastic liner but no joint. If's yours if you need it. Transport?

 

[[32511]]

Bit arrived safely- many thanks, theforeman. Phil