jwfrary
Well-Known Member
If always been of the opinion anode bolts want a small 'key' on the back of the welded flange like some skin fittings do. This would greatly prevent turning when renewing anodes.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Good method to bed anode bolt into GRP hull?
- Thread starter Cardo
- Start date
doug748
Well-Known Member
If always been of the opinion anode bolts want a small 'key' on the back of the welded flange like some skin fittings do. This would greatly prevent turning when renewing anodes.
That's right. Post 8 has some info, they were designed in the wooden boat age.