Gel coat worn away, access tricky!

[Zagato]

The rudder has been left halfway down on a mooring wearing away a small 2"X1" patch of gel coat. It is at the bottom inside of the casing so can only get a finger or something up in there to wipe on. What can I use. Usually the rudder doesn,t touch it, but they left it halfway down. There is a rudder bearing keeping it away from the worn area. I just want to seal it so water doesn,t get the matting all soggy... thanks.

 

[northwind]

Epoxy, I use this stuff as west's is overpriced..

EL2 Epoxy Laminating Resin - Easy Composites

 

[northwind]

Deleted.. Duplicate post

 

[Zagato]

Many thanks for your linked company, they suggested I use flow coat. Looking at it again it's no where near as bad as I thought. About 1cm by 5cm of the gel coat has been very lightly worn away... it just needs waterproofing.. just need a tiny tube of something to wipe on..

 

[Spirit (of Glenans)]

This might fit the bill:
Gelcoat Filler - TEROSON180ML : Amazon.co.uk: Sports & Outdoors
and you don't have to wait for ot to arrive by post, your local chandelry will have it, so you canget on with the repair before it gets waterlogged.