2 Nov 2021 #1 V Vivianfox New Member Joined 2 Nov 2021 Messages 1 Visit site Does anyone know how you open this fresh water inlet filter for cleaning?
2 Nov 2021 #2 P Paul1962 Well-Known Member Joined 2 Jan 2010 Messages 506 Visit site Unscrew the clear bit by the look of it
3 Nov 2021 #3 Momac Well-Known Member Joined 7 Feb 2008 Messages 7,771 Location UK Visit site From the photo can just about make out some arrows moulded in the plastic which show which way to turn.
From the photo can just about make out some arrows moulded in the plastic which show which way to turn.
3 Nov 2021 #4 simonfraser Well-Known Member Joined 13 Mar 2004 Messages 7,646 Location Outboards 4 mobo’s, unless you do a lot of miles Visit site reading spex and a torch ?
13 Dec 2021 #5 C chrisjordan New Member Joined 11 Jul 2021 Messages 6 Visit site Some arrows formed in the plastic, check, which denote which direction to turn, may just about be seen in the photo.
Some arrows formed in the plastic, check, which denote which direction to turn, may just about be seen in the photo.
13 Dec 2021 #6 Clancy Moped Well-Known Member Joined 18 Jun 2019 Messages 10,610 Location In situ. Visit site As above, have some kitchen roll handy and don't be surprised if it stinks.
13 Dec 2021 #7 S snowbird30ds Well-Known Member Joined 30 Mar 2016 Messages 1,529 Location Norfolk broads based, coast when time allows. Visit site Have a jug of water ready to rinse it before refitting, as the water will be off when you unscrew to find it needs cleaning. It just unscrews and the gauze should lift out.
Have a jug of water ready to rinse it before refitting, as the water will be off when you unscrew to find it needs cleaning. It just unscrews and the gauze should lift out.