MapisM
Well-Known Member
LOL, funny story indeed. 
The inconvenience you mention is actually not a problem when the blocks are separate, as in my previous pic. In fact, this allows you to face astern when mooring stern to, and still be able to easily reach the gear levers (the port one with your right hand, and stbd with l/h).
Otoh, with this setup, you obviously can't throttle both engines with one hand, but that's no big deal with cruising boats, where you normally "set and forget" the throttles. Completely different story with very fast boats, of course, where you're constantly throttling...
As an aside, I'm surprised to hear of separate levers with outdrives.
For the builder, is't easier/faster (=less expensive) to use the combined throttles boxes supplied by the engine/outdrives manufacturer.
Chapeau to Sealine for choosing to go that route, if that's how the boat was built... Or was she maybe repowered?
The inconvenience you mention is actually not a problem when the blocks are separate, as in my previous pic. In fact, this allows you to face astern when mooring stern to, and still be able to easily reach the gear levers (the port one with your right hand, and stbd with l/h).
Otoh, with this setup, you obviously can't throttle both engines with one hand, but that's no big deal with cruising boats, where you normally "set and forget" the throttles. Completely different story with very fast boats, of course, where you're constantly throttling...
As an aside, I'm surprised to hear of separate levers with outdrives.
For the builder, is't easier/faster (=less expensive) to use the combined throttles boxes supplied by the engine/outdrives manufacturer.
Chapeau to Sealine for choosing to go that route, if that's how the boat was built... Or was she maybe repowered?