7 Sep 2018 #21 simonfraser Well-Known Member Joined 13 Mar 2004 Messages 7,609 Location Outboards 4 mobo’s, unless you do a lot of miles Visit site volvopaul said: There is no set speed but based on the remedial work I’ve done to engines it must be off idle speed to splash lubricate the rockers and ball studs . Click to expand... tnx, 1000 revs minimum for any length of time on mine, don't idle it.
volvopaul said: There is no set speed but based on the remedial work I’ve done to engines it must be off idle speed to splash lubricate the rockers and ball studs . Click to expand... tnx, 1000 revs minimum for any length of time on mine, don't idle it.
7 Sep 2018 #22 AdeOlly Well-Known Member Joined 19 Dec 2004 Messages 1,616 Location Sussex Visit site volvopaul said: The super chargers on the D range cut in as and when required based on load , throttle position , demand etc so basically if it’s needed it gets it, play with the levers gently and they won’t cut in. Click to expand... That's interesting - I didn't know that... I wish that feature existed on my KAD300s.
volvopaul said: The super chargers on the D range cut in as and when required based on load , throttle position , demand etc so basically if it’s needed it gets it, play with the levers gently and they won’t cut in. Click to expand... That's interesting - I didn't know that... I wish that feature existed on my KAD300s.
