Epoxy problem

[KellysEye]

>I mix in the bottom of a milk container and use a big lolly stick (spatula) I mark the resin and hardener levels on the stick (2:1 for mine) and just fill to each level, then stir.

That's a good idea I'll start using that, thanks. Usually I measure using a table spoon.

 

[Fantasie 19]

>I mix in the bottom of a milk container and use a big lolly stick (spatula) I mark the resin and hardener levels on the stick (2:1 for mine) and just fill to each level, then stir.

That's a good idea I'll start using that, thanks. Usually I measure using a table spoon.

+1

I've been using syringes but it's a bit of a faff cleaning up afterwards....

 

[Bilgediver]

+1

I've been using syringes but it's a bit of a faff cleaning up afterwards....

Digital scales in Lidl £7.00 made it easy for me with cling film to keep them clean for the Swimbo!

 

[Mariner69]

I have bought a load of the cheap syringes from the chemist; who is much cheaper than the chandler, although he does interrogate you as to the intended use.

Using the 1ml diabetic syringe, I just cut off the needle part with sharp snips and dump it still in the cover. Once used they are cheap enough to just thow away.