Epifanes filler

[Lloydus123]

Hi all, I’m currently using epifanes one part paint system , I have the first coat of primer on , which have shown me some bits and bobs (slight cracks ) that need filling before the next coat of primer . Epifanes say I must use their brand of filler , however I can’t seem to source any , I just expected it would be stocked in most chandlerys, is there another filler I would be ok to use ? It sais not to use an epoxy filler

thanks

 

[Sumara of Weymouth]

Hi all, I’m currently using epifanes one part paint system , I have the first coat of primer on , which have shown me some bits and bobs (slight cracks ) that need filling before the next coat of primer . Epifanes say I must use their brand of filler , however I can’t seem to source any , I just expected it would be stocked in most chandlerys, is there another filler I would be ok to use ? It sais not to use an epoxy filler

thanks

I normally use FEW filler from Bonda. The FEW stands for Fine, Elastic, White. It is a polyester filler which sands well and can be used between top coats too.

 

[jwfrary]

International interfill will do the Job, since both products are the same parent group.

You could try marine and industrial in Wroxham, they are epivanes distributors