Dont know my boats make. [Pics]

RTMAGUIRE

New Member
Joined
15 Aug 2020
Messages
7
Visit site
IMG-20200724-WA0001.jpgad_2_1592748442480.jpgIMG-20200725-WA0002.jpgIMG-20200803-WA0025.jpgIMG-20200803-WA0000.jpg


I liked the shape of this hull and bought it as a project from Hurlingham Yacht club London where it had been abandoned and the cabinroof had been cut off.

I am interested to know any history and would like to get drawings for the original boat its measurements are 25'9" Long 8'6"Beam.

I've tested the hull and its sound, there was a stern drive type unknown and an inboard engine may be Perkins? long gone. People have said it could be a Tremlet.

Its now in its new home in Carrickfergus County Antrim and has been washed out and will go into my workshop for re build shorty.

I will keep you posted of my progress.

• Do you know the boat or its history?
• What is her make and model?
• Have you any drawings or catalogues of Similar?

Thank you Terry
 
I would say definitely not a Tremlett, wrong hull shape, and I’m not sure they ever made them with outdrives.
The name of the boat is the most inappropriate I’ve seen in a long time! Great trailer. Good luck with the project.
 
Thank you for your response the hull measures 25.'6" ideally need a plan and measurements to check out the interior layout.
It definately is a Seamaster thats confirmed..Terry
 
Jonesboatyard /viking mouldings were very helpfull but don't have any info on the seamaster 26?? Even a layout or brochure would be helpfull and save me lifting all the sections and re drawing it on Autocad Regards Terry
 
Hello Terry. Cant help you with the boat but know a man etc etc in Carrickfergus. Do you know Basil ? built a steel Bruce Roberts. Spends all his time in the marina............he' ya man. Say hello from me.
 
I think it’s a Senior 26. The outdrive and engine combo (Perkins badge on dash) are correct and the helm is on the port side.
 
Top