jimnutmeg
New Member
Keeps going for a few seconds. Cannot find a leak anywhere. Any ideas?
Domestic water pump
- Thread starter jimnutmeg
- Start date
VicS
Well-Known Member
If you mean keeps cutting in for a few seconds could be the valves in pump letting the pressure leak back though the pump if you are sure there are no leaks.
Probably a service kit available.
Probably a service kit available.
charles_reed
Well-Known Member
Your question is unclear.
If a conventional pump with accumulator, it will run after opening a tap for up to 30" as it replenishes the accumulator.
If it starts up for no reason, you have a leak.
If a conventional pump with accumulator, it will run after opening a tap for up to 30" as it replenishes the accumulator.
If it starts up for no reason, you have a leak.
FirstLady
Member
Had the same last year- it turned out to be the pressure relief valve on the calorifier was letting by. Took a long time to find and ended up being a bu*ger of a job to sort due to corroded fittings etc!!! May be worth a look.
