Do you anti-foul your prop

[TQA]

I use Primocon followed by multiple coats of Triiux. This gives me about 3 to 4 months of a clean prop before it is back to scraping it.

TOP TIP If you know you are going to be in a high fouling area and not moving for a month or more tie a lightweight bin bag around the prop with some cotton string. If you have to move in an emergency the bag will just get shredded.

 

[Nostrodamus]

Thank you for your replies.
Just out of interest, would painting the prop help save anodes?
I have one at the end of the prop and one on the sail drive leg.

 

[Tranona]

No. The anode is protecting the bronze against the stainless bits in the prop mechanism. Don't antifoul or paint the mating surface of the anode to the prop.

 

[davidfox]

The udder cream is not like the other lanolin treatments I have used, the instructions were to rub it in well, we did it with 2coats and I must say it looks extremely underwhelming it doesn't have the reassuringly thick coating that you get with Propshield or the green lanolin gunk but then again the other 2 didn't work very well so.....