Diesel priming bulb

O

Oily Rag

Well-Known Member
Joined
27 Jan 2016
Messages
207
Visit site
Can anyone recommend a make/manufacturer of a good quality rubber bulb for priming my fuel system. I'll need 10mm barbs.

Any to avoid?
 
Many thanks. I think that may only be compatible with the Delphi range. I was just looking for a squeeze bulb, but the range is enormous. I assume it will have to be compatible with diesel. A CE mark might help as well. Thanks again.
 
Oily Rag said:
Many thanks. I think that may only be compatible with the Delphi range. I was just looking for a squeeze bulb, but the range is enormous. I assume it will have to be compatible with diesel. A CE mark might help as well. Thanks again.
Click to expand...
Don't really understand what you are meaning by only compatible. If you are really bent on a priming bulb, then don't fit one from an outboard. try Perkins, 130506300, rated for diesel.
 
I did a lot of internet search, and in the end I bought these. If you look around the amazon site, you will find these with different size pipe fittings

https://www.amazon.co.uk/Transfer-Siphon-Primer-Priming-QLOUNI/dp/B07XY715CG/ref=sr_1_5?crid=2221POI5N170Y&dchild=1&keywords=diesel+primer+bulb&qid=1622118860&sprefix=diesel+bul,aps,177&sr=8-5

I wanted ones with metal end fittings to be more robust. Fitted one, one as a spare! Been installed for a few months now, made priming the engine simple. No issues so far.
 
Try asap-supplies.com
They supply primers that fit on to your primary filter
I fitted one 3 years ago..................when you change the filters it fills the system very quickly
 
You must log in or register to reply here.

Share this page

Top