Depth transducer

[nimbusgb]

I know that most of the ultrasonic transducers are made by the same crowd but for the life of me I can't remember their name.

Can anyone help? I need to source a Raymarine compatible transducer with specific dimensions. It needs to fit an existing skin fitting, previously occupied by a B&G transducer.

 

[prv]

I think you're thinking of Airmar.

Pete

 

[nimbusgb]

I think you're thinking of Airmar.

Pete

Thank you Sir!

A virtual pint to that man!

 

[Highndry]

SM Group have just sourced an Airmar paddle wheel for my Raymarine ST40 for me.

 

[Ex-SolentBoy]

For years they have been promising an ultrasonic depth speed temperature for NMEA 2000.

If you find one please let me know.

 

[gjgm]

I know that most of the ultrasonic transducers are made by the same crowd but for the life of me I can't remember their name.

Can anyone help? I need to source a Raymarine compatible transducer with specific dimensions. It needs to fit an existing skin fitting, previously occupied by a B&G transducer.

Appreciate the boat needs to be out of the water, but it is dead simple to knock the old transducer out and install a new one.

 

[mersey]

For years they have been promising an ultrasonic depth speed temperature for NMEA 2000.

If you find one please let me know.

It's been available for a while the DST800.

http://www.airmartechnology.com/2009/products/marine-product.asp?prodid=73

 

[nimbusgb]

Appreciate the boat needs to be out of the water, but it is dead simple to knock the old transducer out and install a new one.

Boat has just gone back into the water and we discovered the mismatch/doa on the transducers.

Looks like we are going to have to do a 'through the hull mounting' of the regular Raymarine transducer. Airmar ( France )don't have a compatible replacement and Raymarines part ( 40mm od ) does not fit the hole we have ( 32mm ID )