cutless bearing

[sterntube]

hi all i have a seaward 23
i have a bearing on the p bracket that needs replaced is there another where the shaft comes through the hull?
is it an easy job to undertake yourself
many thanks 1989 boat

 

[jrudge]

Yes there is, however the p bracket one is ( in my experience ) then main one that wears and needs replacement. I have replaced mine

 

[oldgit]

Yes there is, however the p bracket one is ( in my experience ) then main one that wears and needs replacement. I have replaced mine

+1
Cutlass bearings can be any size both imperial and metric.Need to measure your shaft and source new bearing before removing boat from water.
Around £50.00 to £100 ish depending on source and size.
Would always go for metal sleeve not cheaper plastic types.
you can buy a proper extraction tool or cobble up your own device.
Watch out for possible hidden hex bolts/grub screws holding in sleeve, might be under several coats of anti-foul.
Ancient cutlass bearings in the "P" bracket can be bugger to shift and heat can sometimes help.