31 Jul 2017 #1 sunquest Well-Known Member Joined 31 Oct 2005 Messages 871 Location Kent Visit site Can someone advise how to feed two cameras into a Garmin 4012 which has only one video socket. I also have a 4012 at the lower helm but access could be difficult. Thanks in advance.
Can someone advise how to feed two cameras into a Garmin 4012 which has only one video socket. I also have a 4012 at the lower helm but access could be difficult. Thanks in advance.
1 Aug 2017 #2 jrudge Well-Known Member Joined 4 Dec 2005 Messages 5,502 Location Live London, boat Mallorca Visit site http://static.garmin.com/pumac/GPSMAP_4000-5000_Install_EN.pdf Page 19 of the installation manual !!!
http://static.garmin.com/pumac/GPSMAP_4000-5000_Install_EN.pdf Page 19 of the installation manual !!!
1 Aug 2017 #3 sunquest Well-Known Member Joined 31 Oct 2005 Messages 871 Location Kent Visit site Thanks Jrudge. Simple when you know how! Previously I read the manual and did not notice the two input cables, I only saw the video socket.
Thanks Jrudge. Simple when you know how! Previously I read the manual and did not notice the two input cables, I only saw the video socket.
1 Aug 2017 #4 jrudge Well-Known Member Joined 4 Dec 2005 Messages 5,502 Location Live London, boat Mallorca Visit site Re your second point the network is not likely to transmit video to the lower helm so if you need it there you will need a splitter and more wires. However depending on the camera you are mounting and how often you drive ( and park) from the lower helm it is not likely to be worth the effort.
Re your second point the network is not likely to transmit video to the lower helm so if you need it there you will need a splitter and more wires. However depending on the camera you are mounting and how often you drive ( and park) from the lower helm it is not likely to be worth the effort.