oldmanofthehills
Well-Known Member
I had never heard of anyone leaving engine power off when at sea, except maybe for transoceanic stuff. No downside at allWhy not leave the engine battery switched on when you're on the boat?
I had never heard of anyone leaving engine power off when at sea, except maybe for transoceanic stuff. No downside at allWhy not leave the engine battery switched on when you're on the boat?
Because the low oil pressure alarm sounds very loudly. That’s my new piece if knowledge from this thread - I thought all boats with separate isolator switches and VSRs did this. I now find out after 10 years that apparently they don’t and that’s one reason I liked my other boat which has a 1-2-B switch and an ignition key. This boat just has a push button start.Why not leave the engine battery switched on when you're on the boat?
That’s two very different skill sets - my wife is an extremely capable navigator, helm and sailing master but would glaze over fast if I mentioned we have more than one battery or what the bank is or what an alternator or MPPT does. It’s simply of no interest to her, in the same way compression and valves and impellers are just words and a yawn to me.If sailor can navigate the oceans to distant lands surely it is not beyond his capabilities to work out how best to operate a 1/2/both switch.
When the engine is running any switching to another bank is done by me.
Because the low oil pressure alarm sounds very loudly. That’s my new piece if knowledge from this thread - I thought all boats with separate isolator switches and VSRs did this. I now find out after 10 years that apparently they don’t and that’s one reason I liked my other boat which has a 1-2-B switch and an ignition key. This boat just has a push button start.
Remind us what engine and control panel you have,Because the low oil pressure alarm sounds very loudly. That’s my new piece if knowledge from this thread - I thought all boats with separate isolator switches and VSRs did this. I now find out after 10 years that apparently they don’t and that’s one reason I liked my other boat which has a 1-2-B switch and an ignition key. This boat just has a push button start.
I have an "ignition" key on my Bukh panel doing that job.
And as the engine and domestic circuits are both connected as soon as I turn on whichever battery I've chosen, I turn the key and the engine starts.
If the key is in the stop position too long, then the oil pressure warnings will light and sound. Just as well because I gather the stop solenoid can overheat (even catch fire? ) if left energised.
It’s a Yanmar 4JHE and I don’t think I’ve ever taken a picture of the control panel. It has a rev counter with engine hours, a fuel guage that has never worked but has a switch to turn it on, a button to start the engine and a button to stop. Yes the isolator powers the panel with no other switches I’d noticed but that’s an obvious idea now it’s pointed out. Perils of sailing mostly on just two boats for years (one with a 1-2-B and not realising other boats were different.Remind us what engine and control panel you have,
You should be able to switch the battery isolator on without activating the engine control panel. Id expect a switch of some sort to power up the panel before you operate the glow plugs if fitted or press the start button to crank the engine
It’s a Yanmar 4JHE and I don’t think I’ve ever taken a picture of the control panel. It has a rev counter with engine hours, a fuel guage that has never worked but has a switch to turn it on, a button to start the engine and a button to stop. Yes the isolator powers the panel with no other switches I’d noticed but that’s an obvious idea now it’s pointed out. Perils of sailing mostly on just two boats for years (one with a 1-2-B and not realising other boats were different.
Nothing there looks quite right but the ones on another google search look just the same except that the key is just a push button and they have a very obvious rocker switch, I have a horrible feeling that I’ve never noticed the rocker switch on mine in a decade and just left it on, Oops and red face if so, but every new discovery is a gain,Most of the Yanmar panels, without a key switch, have a pair of rocker switches. Ign on/off, heat, start. They also have some warning lamps or a 52mm combination widget for the warning lamps. Anything here look like yours ; Yanmar 4JHE instrument panel - Google Search
Nothing there looks quite right but the ones on another google search look just the same except that the key is just a push button and they have a very obvious rocker switch, I have a horrible feeling that I’ve never noticed the rocker switch on mine in a decade and just left it on, Oops and red face if so, but every new discovery is a gain,
ExOh for a nice simple 1-2-B switch![]()
True - that always worked fineOh for a nice simple 1-2-B switch![]()