Cetrek 715 wiring

[Italiakivu]

I have a Cetrek autopilot which works fine apart from the fact that the 715 remote cable has been changed and the colours now make no sense. Does anyone know what the colours should be inside the 715 handset or else what the pins functions are? I have reseurrected the bulkhead socket and need to resolder all the pins.

 

[Mr Googler]

I have a Cetrek autopilot which works fine apart from the fact that the 715 remote cable has been changed and the colours now make no sense. Does anyone know what the colours should be inside the 715 handset or else what the pins functions are? I have reseurrected the bulkhead socket and need to resolder all the pins.

https://www.cruisersforum.com/forums/f13/cetrek-715-cable-problem-265402.html

 

[Italiakivu]

https://www.cruisersforum.com/forums/f13/cetrek-715-cable-problem-265402.html

View attachment 207226

Thank you, it was this post that made me think I might get some help! Thing is that as in the photo I don't have the plug on the 715 controller so I don't know what the colours/functions are of the pins left to right. On the right (of 7 pins) it says SCRN on the board and I am wondering if that equates to black but I doin't want to risk toasting it as I know it is good. The post I read didn't say that the system was all good so I am hoping someone will have a photo of an opened correctly wired 715. I also have a 730 and logic would say they are wired the same but I would like to be sure.