Canopy caper

[orionbelt]

Hi, newbee here. I've just bought a shetland 535 but one side of the canopy is missing. How or where do I get the same material to cut round the one remaining side to make two new sides. I plan on not having any clear window material and re fastening with either studs or turn buckles. A rough size for the material would be 1.5m wide and 1m height.

I will be bombarding you lot with the need for help on many things so I hope I don't annoy most of you.

Thanks

<hr width=100% size=1>

 

[Forbsie]

Try <A target="_blank" HREF=http://www.hawkehouse.com/>Hawke House Marine</A>.

<hr width=100% size=1>

 

[steverow]

Point North in Anglesey supply canvas and most sundries for canopy manufacture.

www.pointnorth.co.uk


Steve.

<hr width=100% size=1>

 

[Dave_Snelson]

A friend of mine has just this boat and made a very successful canopy from lorry tarpaulin, all in one piece and fastened with turn buckles and stretch cords. Works a treat and totally water-proof.

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[itsonlymoney]

Dave
If it's that good why have you not used it on the Windy. /forums/images/icons/laugh.gif
Buy the proper stuff and dont be a tight git.
Ian

<hr width=100% size=1>Play the best game you can with the cards you've been dealt ! ! !