Bulgin Buccaneer Crimp Tool

[SimonP85]

Can anyone recommend a suitable crimp tool for a standard Bulgin Buccaneer 9 pin socket? I need to replace a socket used for the anchor control that's badly corroded through. The recommended Bulgin one is somewhat expensive!

http://uk.farnell.com/bulgin/px0769-s/socket-low-profile-9-pole/dp/978050.

Many thanks

 

[David2452]

http://www.amazon.co.uk/Coaxial-Cri...qid=1434091991&sr=8-3&keywords=bnc+crimp+tool

The pins should be similar to Deutch connectors, the tool for those is similarly if not more expensive. You can do a decent job using a 10 base ethernet BNC crimp tool, use the tiny crimp aperture designes for the pin, it will also come in handy for solderless PL259s.

Can anyone recommend a suitable crimp tool for a standard Bulgin Buccaneer 9 pin socket? I need to replace a socket used for the anchor control that's badly corroded through. The recommended Bulgin one is somewhat expensive!

http://uk.farnell.com/bulgin/px0769-s/socket-low-profile-9-pole/dp/978050.

Many thanks

 

[SimonP85]

Perfect many thanks