Lon nan Gruagach
Active member
After many months contemplating free plans for a dinghy I saw a thread here asking if anyone had built Flint by Ross Lillistone.
Link:
Well. I was hooked and duly forked out for the plans. Next spend was for the glass tape and mat and epoxy for stitch and glue plus optional extra all over glass skin for "abrasion resistance". Next will be for the ply. meanwhile, since there are trees to be had here and a bloke with a Wood Mizer to plank them, I set to getting the timber for a multitude of fiddly bits and oars and mast and spars.
Dont hold your breath, this will take some time.....
Link:
Well. I was hooked and duly forked out for the plans. Next spend was for the glass tape and mat and epoxy for stitch and glue plus optional extra all over glass skin for "abrasion resistance". Next will be for the ply. meanwhile, since there are trees to be had here and a bloke with a Wood Mizer to plank them, I set to getting the timber for a multitude of fiddly bits and oars and mast and spars.
Dont hold your breath, this will take some time.....