Breaking 1962 Audacity

[kevinrbeech]

Sadly I'm going to scrap my unfinished project, a 1962 Audacity. Before lifting out in 1999 she was being sailed so is complete. A lot of the hull has been rebuilt as original (ie cold moulded) using 1.5mm mahogany and west system epoxy. She is currently in a barn and has been for the last 2 years.
Although obviously not a classic, I'm sure a lot of the fittings would be of interest to anyone restoring another boat.
I have everything from galvanised cleets, lifting keel mechanism, rudder, mast & roller reefing boom in wood, fibreglass coach roof, blocks, winches, tiller, etc.
Of course if anyone is interested in a project then please talk to me, the hull is free to anyone that is interested.
The boat is on a two wheeled trailer that has been adapted to support a 21', 3 tonne lifting keel sail boat, the props are adjustable, which will be for sale once the boat has gone.
Kevin

<hr width=100% size=1>

 

[Ardenfour]

Just discovered this post after sending you a reply re veneer

I'm looking for stanchions and bases, and rudder pintles and gudgeons for a halcyon 23


<hr width=100% size=1>

 

[aztec]

PM\'d you...

Hi sent you a PM, just click the flashing envelope think, when you're logged on as user.

cheers, steve.

<hr width=100% size=1>