Bravo 3x oil leak into water inlet - again!

[PCUK]

Quad ring appears to not be the problem. Been reading on US forums about a “puck” on Bravo 1 drives between the oil and water that looks like an engine core plug and is pressed in. Does the Bravo 3x have the same puck? It's located ahead of the prop shaft on the Bravo 1. Thanks for any further help!

 

[QBhoy]

Hi
Hoping to help you a little bit not sure I totally understand your problem ?
What oil are you getting and into what ? You mean gear oil or engine oil and what symptoms are you seeing exactly

 

[PCUK]

Oil is entering the water passage in the bottom unit. If I pressurise the lower unit gearbox in a water tank air can be seen coming up through the forward water inlet passage. Thanks.