Blanking plugs

[Adrianwool]

I need to get hold of some blanking plugs for my boat, these will be to provide a neat finish where I have drilled some circular holes to enable me to reach some nuts and bolts which required tightening. These holes are on non stressed fibre glass panels about five ml in thickness. I am looking for the push in circular barrel type. My search on the web has identified some suppliers whose minimum orders are far too large for my needs. I probably need a few at about 1 inch diameter and a few at about two inch diameter. Does anyone know of a retail outlet/chandlery etc who will supply a small quantity

 

[exfinnsailor]

See if you can find a local machine shop .. Some will machine plastic as well as stainless .. Might be a cheaper option .. Only other thing I can think of is on kitchen doors .. Not very tough though .. Or fill the holes ..

 

[davidej]

Would grommets from a car parts retailer (eg Halfords) do the trick? You can get them as blanking plugs rather than with a hole in