Black Plastic window trim

TwoCan

Member
Joined
22 Apr 2014
Messages
26
Location
Hamble, Hampshire
www.knoticalbutnice.co.uk
We have a Hardy Seawings 355. looking to replace the black plastic strip that goes along the windows - see image. we split ours replacing the window locks. 5mm high, approx 2mm thick. the old one is currently riveted in place. we would need to drill a window lock hole in it so dont want anything too hard. Any ideas for a supplier or for a substitute.

DSC03137.jpg
 
We have a Hardy Seawings 355. looking to replace the black plastic strip that goes along the windows - see image. we split ours replacing the window locks. 5mm high, approx 2mm thick. the old one is currently riveted in place. we would need to drill a window lock hole in it so dont want anything too hard. Any ideas for a supplier or for a substitute.

View attachment 78302

Is it the horizontal strip along the bottom of the window? In your picture it looks bigger than 5mm x 2mm
 
We have a Hardy Seawings 355. looking to replace the black plastic strip that goes along the windows - see image. we split ours replacing the window locks. 5mm high, approx 2mm thick. the old one is currently riveted in place. we would need to drill a window lock hole in it so dont want anything too hard. Any ideas for a supplier or for a substitute.

View attachment 78302

I believe it's a Trend Marine window (they used a similar system on Fairlines of the 80s & 90s) but the last time I tried to order parts I was told they no longer support products of that era . From memory, the black plastic strip is an L section and fixed with a pop rivet.
 
Top