Beta 20 fuel filter

[rightstuff]

Normally cut them off and fit jubclips have done them with a grinder if your careful

 

[donm]

So a frustrating day this was. I tried to remove the existing fuel lines and run new ones to the adaptor a installed last week but I could not budge then.
Can anyone explain how to undo the clips shown in the photos please.

View attachment 202978View attachment 202979

You can usually pry them open by putting the flat end of a screwdriver under one of the knuckles and turning it. Alternatively you can buy a clamping tool made for the job, but if you’re only using them on three clamps……………

 

[donm]

You can usually pry them open by putting the flat end of a screwdriver under one of the knuckles and turning it. Alternatively you can buy a clamping tool made for the job, but if you’re only using them on three clamps……………

P.S. don’t replace them with jubilee clips but get hold of fuel clips. They may look similar but they are not!