Bennet Trim Tabs

Haydn,
Also try looking at the male/female connecters near the pump. I had a similar problem and it turned out to be a wire had been kicked out of the connecter as it lay next to the tread plate.

Eddie
 
Joined in half way and only sort of half read, apologise if this is already been said.

Agree the solenoids are most probable cause and so easy to switch.

remember that the tabs are cross wired.

When you press port bow down the starboard side tab should lower.

The switch is complicated , 6 way rocker switch.
I had one of those go wrong, you could change the wires from the switch first to see if that will operate the tab.

Assume you have filled the reservoir with oil.
 
Oi!
It's dark down there.
It took 3 hours to shift spare props , anchors. dehumidifires, awld rope, fishing tackle, (why do you keep copies of Playboy going back to 1973 anyway?) and some other stuff to get to the prob.

Actually Folks.
I was lucky.
Debs dragged hlb out the way.

Job was then sorted.

Built in a 'Retro ' service prob for more Wages!

Oh shite!!
Shouldn't av posted that /forums/images/graemlins/smirk.gif
 
Hope it wasn't too hard a job for you to have disconnected it in the first place K. /forums/images/graemlins/grin.gif (Don't worry - he can afford it). /forums/images/graemlins/grin.gif
 
Christ, if you'd said you were down there reading playboy, I'd have passed you the reading lamp. Mind I now know Why I was pressing buttons, whilst you sprayed hydraulic oil down yer pants. /forums/images/graemlins/blush.gif
 
[ QUOTE ]
/forums/images/graemlins/grin.gif (Don't worry - he can afford it). /forums/images/graemlins/grin.gif

[/ QUOTE ]

Yes --- but times are hard C Crunch and all that there.
Seen how much Playboy-- Practical Boat Owner --- and the Ghenis Khan Monthly cost these days?

Plus Subscriptions to 'On The Square' and 'Roll yer trowsers up' Monthly?. (teflon ones Deb's knows!)


Plus keeping up with vicious Social Life in Conwy Marina.

And the VET costs every time Henry (lovely little pet Terrier folks, lives aboard) savages a Swan!

Hellish overheads /forums/images/graemlins/wink.gif
 
[ QUOTE ]
I'm installing a coffe machine, beer , fag dispencers. thems is feasable . But----- and a one arm bandit in MF's saloon, I recon I'll be quids in next time. /forums/images/graemlins/grin.gif

[/ QUOTE ] .


The Bandit?

Doesn't it av to be some Miles offshore?

Yer stuffed then in Conwy.

'All ashore thats stayin ashore'

Yer see Folks.
There's a little Dredger trying to suck the mud out the Place.
Fightin a loosing battle I,d say.

'Meanwhile back at the Ranch'

I,m suckin the dosh out of hlb and others.
Good Innit!!

/forums/images/graemlins/grin.gif
 
[ QUOTE ]
I'm installing a coffe machine, beer , fag dispencers and a one arm bandit in MF's saloon, I recon I'll be quids in next time. /forums/images/graemlins/grin.gif

[/ QUOTE ]

And the other thing Peeps.

When I proffered the Invoice for the repair of the Bennett trim tabs.


hlb went all Southerner on Me.

'Gordon Bennett'( I Think He said /forums/images/graemlins/wink.gif)
 
Well I recon I've had a one armed bandit on the boat all week, so thought I might as well install my own, mind, never said I was putting any money in it. Thats your job. /forums/images/graemlins/tongue.gif
 
[ QUOTE ]
Thats your job. /forums/images/graemlins/tongue.gif

[/ QUOTE ]

Hey Up!

More Jobs.

'Instilation of Single Handed lever Mechanism'

Two handed Job.

'11 hours should do it.'
To Coin a phrase.


Bit busy at the moment.

Could 'slot' it in ealrly next week though.




/forums/images/graemlins/grin.gif
 
You must log in or register to reply here.

Share this page

Top