Rogfox
New Member
Have had a Beneteau Antares A30 Fly from new 2014 and love the boat. Having been based on the Thames since April 2016, the external discharge from the waste tank is locked off and the tank pumped out on a weekly basis.
During annual maintenance I have noticed corroded brass bolts bolts fallen from the pump assembly of the Jabsco Discharge Pump which I now want to replace. I also want to remove and clean the waste depth sender.
Access to the waste tank is blocked by the engine exhaust hose which runs across the access hatch.
Has anyone removed the exhaust tubing to gain clear access through the bulkhead hatch or has anyone found a better entry into the waste tank through the galley wall or the fridge cabinet.
Any suggestions would be appreciated.
During annual maintenance I have noticed corroded brass bolts bolts fallen from the pump assembly of the Jabsco Discharge Pump which I now want to replace. I also want to remove and clean the waste depth sender.
Access to the waste tank is blocked by the engine exhaust hose which runs across the access hatch.
Has anyone removed the exhaust tubing to gain clear access through the bulkhead hatch or has anyone found a better entry into the waste tank through the galley wall or the fridge cabinet.
Any suggestions would be appreciated.