Beneteau Antares 30

N

Nigel52

Well-Known Member
Joined
21 Nov 2021
Messages
267
Location
Poole
Visit site
Has anyone got a Antares 30S or 30 Flybridge. If so can you let me know all the anodes I need for the following:
Propeller, shaft, rudder, trim tabs, hull, bow thruster, stern thrusters.
 
45mm conical on prop, 2 flying saucer type on rudder and 1 on stern. None on my bow thruster but a very small conical 1 on the stern thruster with centre alan bolt. None on shaft or tabs ( interuptor type?) As its still afloat I'm unable to provide any more sizes,sorry
 
baldyash said:
45mm conical on prop, 2 flying saucer type on rudder and 1 on stern. None on my bow thruster but a very small conical 1 on the stern thruster with centre alan bolt. None on shaft or tabs ( interuptor type?) As its still afloat I'm unable to provide any more sizes,sorry
Click to expand...
Thank you
 
baldyash said:
45mm conical on prop, 2 flying saucer type on rudder and 1 on stern. None on my bow thruster but a very small conical 1 on the stern thruster with centre alan bolt. None on shaft or tabs ( interuptor type?) As its still afloat I'm unable to provide any more sizes,sorry
Click to expand...
I have the Quick BTQ1805512 Bow Thruster and the manual shows it does have a anode Part Number BTQ185
Do you have the part numbers for the propeller conical anode.
Thanks
 
You must log in or register to reply here.

Share this page

Top