B&G Network Quad Depth

[AlanRD]

My Network Quad depth instrument shows the three floating bars indicating it is working properly but unable to find a good depth reading. I have now fitted a new depth transducer and checked all the wiring but still have the three floating bars. As the instruction book indicates the instrument is working properly I have run out of ideas. Any help would be greatly appreciated.

 

[tjc]

My Network Quad depth instrument shows the three floating bars indicating it is working properly but unable to find a good depth reading. I have now fitted a new depth transducer and checked all the wiring but still have the three floating bars. As the instruction book indicates the instrument is working properly I have run out of ideas. Any help would be greatly appreciated.

I had a B&G ubit like yors until I changed to Raymarine. Mine used to do that in the marinas, locks and moored alongside some boats - may be inteference that you are getting.

Try your old transducer pluged in and over the side when next out.