Ric
Well-known member
Some pikey nicked the Aquagen ATMB towed impellor last night - sailing along nicely then a bang and it was gone.
Replacements are absurdly priced - over €300 for a 90cm piece of 316 steel.
So I want to make my own. I can buy a new set of 113mm blades for about €40 which is reasonable,
But what I can’t remember is whether the mounting for the blades is pitched? Or do they just mount at zero pitch and all the pitch is in the blades themselves?
I should have taken measurements and photos before it got nicked. If anybody has one they could measure/photo/weigh as a template would be most helpful.
Replacements are absurdly priced - over €300 for a 90cm piece of 316 steel.
So I want to make my own. I can buy a new set of 113mm blades for about €40 which is reasonable,
But what I can’t remember is whether the mounting for the blades is pitched? Or do they just mount at zero pitch and all the pitch is in the blades themselves?
I should have taken measurements and photos before it got nicked. If anybody has one they could measure/photo/weigh as a template would be most helpful.